Images copyright Epyx Mountainboards Inc.©2005

Below are graphic options:

"Blue Face" (and see top photo)

"Basic Blue"

"Directors Cut"

With the DCS 32, Flowlab set out to create an experience that replicates snowboarding or waveriding on the street. Years of experimentation in The Lab down south has resulted in The Deep Carve System. Flowlab discovered the geometry that allows a device with no moving parts to recreate the flow of both snowboarding and surfing- Pure geometry that lets you carve to 45 degree angles with no resistance and smooth, fluid transitions edge to edge. Whether you're riding downhill or just cruising around, the patented 14 wheeled Deep Carve System (DCS) allows you to carve with the rhythm and flow of snowboarding and surfing Flowboard- Manufacturing The Flow. Unlike typical skate trucks, which can be tightened or loosened, Flowboard lets you set the board's turning radius from tight sidewalk S-turns to big drawn out lines . For even more realism, angle one "truck" more than the other; Ride in one direction and it behaves like a snowboard (the back of the b oard leads the turns); Ride in the other direction and it behaves like a surfboard (the front of the board leads the turns).

• - Dimensions are 32"L x 8 .5"W.
• - 7-ply maple deck with griptape
• - Symmetrical design with concave
• - Hardened steel El Arco axle with aluminium mounting - brackets and Mr. Mojo risers
• - Wheels are 61mm x 24mm 90A aggressive profile.
• - Deck is 9 layer laminate - twin tip
• - 46 grit aluminum oxide grip tape
• - Length 38"-43" depending on truck setup(96.5-109.2cm)
• - Weight 6 lbs (2.73 kg)